Gold Member Since 2010
Audited Supplier
Wuxi Double Flying Light Tyre Co., Ltd.

Rubber Mounts, Rubber Isolator, Rubber Shock Absorber manufacturer / supplier in China, offering Rubber Vibration Isolator, Vacuum Booster, Oil Seal and so on.

(/ )

Supplier Homepage Product rubber isolator Rubber Vibration Isolator

Rubber Vibration Isolator

FOB Price: Get Latest Price
Min. Order: 5 Pieces
Port: Shanghai, China
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: WJ type series rubber vibration damping pad
  • Installation Method: Fixed
  • Trademark: qiyao vibration isolation
  • HS Code: 4016999090
  • Type: Diesel Generator
  • Conditions of Use: Marine
  • Origin: Wuxi China
Product Description

Size and performance data of vibration damping pad

ModelBearing capacity(kg/cm²)Static deformation at vertical rated load(mm) Natural frequency at vertical rated load(Hz) Vertical limit static load(kg/cm²) Working temperature range(ºC)Damping ratio(C/Cc)
WJ-402~43kg/cm² h 4.2±0.513.8±130 -10~+40>0.06
WJ-604~65kg/cm² h 4.2±0.550
WJ-856~87kg/cm² h 3.5±0.517.5±170
WJ-908~109kg/cm² h 3.5±0.590

Selection method of vibration damping pad:

 
1. The area of a standard vibration damping pad is 24×46=1104cm², and the center area of connecting four convex platforms is 1 cm².
2. The area of vibration damping pad is decided according to the weight and working situation of equipment, it is cut based on a standard cushion block.
Area of vibration damping pad =Equipment weight /The bearing capacity of the selected vibration damping pad
For the equipment with shock and weight increase, the coefficient of overweight should be considered when choosing.

Application instance:

If a kind of equipment weighs 3500kg, the pivot shape is six drawing boards of φ12; because the levelness requirement of this equipment is high, the vibration and weight increase of the equipment at work shall be considered when choosing WJ-85; the weight of the equipment is appropriately increased by about 30% when calculating.
Bearing area = 3500 kg×1.3/7 kg/cm² = 650 cm²
Area of a single support = 650 cm²/6 ≈110 cm²
The vibration damping pad under the support must be exposed by 1cm margin, so the cushion block should be cut into 12×12 cm².

Scope of application:

Used for passive vibration isolation of punching machine, shearing machine, printing machinery and instruments.
Send your message to this supplier
Avatar
Ms. Jacky
*From:
To: Ms. Jacky
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now